Series MW
Application: Motor-run capacitors, especially designed for Fans. Otherwise suitable for all single-phase loads.
CONSTRUCTION: The capacitor elements are formed by winding low loss, self healing, metallized polypropylene film. High speed
computerized winding machines are used for this purpose. The film tension is maintained at a constant value
throughout the winding process thereby totally excluding air from the winding.
TECHNICAL DATA:
| SERIES | MW |
|---|---|
| CAPACITANCE RANGE | 2.5, 3.5, 4.5 µF. Higher ratings also available on order. |
| TERMINATION | MS Tin plated thimble type terminal 5.0 mm wide. |
| OPERATING VOLTAGE | 400 Volts Performance HPFPU (3,000 hrs.) |
| WORKING TEMPERATURE | Max. 55°C. Min. -25°C |
| CAPACITANCE TOLERANCE | ± 10% (other tolerances available on request) |
| SAFETY CLASS | S0 (Non-Protected) |
| FREQUENCY | 50/60 Hz |
| CAN SIZE | D 30mm H54 mm |
| ENCAPSULATION (FILLING MATERIAL) | Wax |
| SLEEVE DETAILS | Insulated & covered with Grey electrical grade heat shrink sleeve. For other colours please enquire. |
| DISSIPATION FACTOR | tan δ <= 0.0005 |
| TEST VOLTAGE BETWEEN TERMINALS | 1.5 Un for 10 seconds |
| TEST VOLTAGE BETWEEN TERMINALS AND CONTAINER | 3 kV 50 Hz for 1 minute |
| ROUTINE TEST | 2.3 kV 50 Hz for 2 sec |
STANDARD: We follow IEC 60252 -1 (2013 -08) for manufacturing and type test.
CATALOGUE NUMBERS/ORDERING CODE: Catalogue Numbers are generated as under:
| 1st – 4th positions | Series code – MW61 |
|---|---|
| 5th – 7th positions | Capacitance code: Capacitance x 10 |
| 8th position | Mounting code: P-Plain base |
| 9th position | Termination code: Thimble type (quick connect ) 5.0 mm |
Example: Motor – run Capacitor Series MW61, 2.5 µF, 400 VAC, in cylindrical aluminum can, with thimble type terminal 5.0 mm.
Catalogue No. MW61025PK