SERIES MW
APPLICATION: Motor-run capacitors, especially designed for Fans. Otherwise suitable for all single-phase AC loads such as Coolers and other small appliances.
CONTAINER: Cylindrical containers made up of aluminium.
ENCAPSULATION: Dry filling material (Non-P.C.B resin).
CONFORMING TO: IEC 60252-1, ISO 9001:2015 and JISC-4908.
RATED VOLTS: 400V – (For other voltages please enquire).
RATED FREQUENCY: 50/60Hz.
CAPACITANCE RANGE: 2.5, 3.5, 4.5 ΜF. (FOR OTHERS, PLEASE ENQUIRE).
TOLERANCES: ±10%
NOTE: Capacitors are wrapped in heat shrink sleeve to minimize the effect of external temperature on capacitors and also useful for internal heat dissipation.
APPLICATION: Specially designed for fans and also suitable for other single phase AC loads.
CONSTRUCTION: The capacitor elements are formed by winding low loss, self healing, metallized polypropylene film. High speed
computerized winding machines are used for this purpose. The film tension is maintained at a constant value
throughout the winding process thereby totally excluding air from the winding.
CONTAINER: Cylindrical container made up of aluminium, wrapped in heat shrink sleeve. Heat shrink sleeve is useful for internal heat dissipation and minimize the effect of external temperature on capacitor.
TECHNICAL DATA:
| SERIES | MW |
|---|---|
| CAPACITANCE RANGE | 2.5, 3.5, 4.5 µF. Higher ratings also available on order. |
| TERMINATION | MS Tin plated thimble type terminal 5.0 mm wide. |
| RATED VOLTAGE | 400 Volts Performance HPFPU (3,000 hrs.) |
| RATED TEMPERATURE | Max. +70°C. Min. -25°C |
| CAPACITANCE TOLERANCE | ± 10% (other tolerances available on request) |
| SAFETY CLASS | S0 (Non-Protected) |
| FREQUENCY | 50/60 Hz |
| ENCAPSULATION | Dry filling material (Non P.C.B resin) |
| DISSIPATION FACTOR | Less than 0.0010 |
| TEST VOLTAGE BETWEEN TERMINALS | Type Test: 2x Rated volts for 60sec. Routine Test: 2x Rated volts for 2sec. |
| TEST VOLTAGE BETWEEN TERMINALS AND CONTAINER | 2.3 kV 50 Hz for 1 minute. |
| RELIABILITY TEST | 1.4* Rated volts for 100,000 cycles (Duty cycle: 2sec on ‘ 2sec off) as per JISC-4908. |
STANDARD: We follow IEC 60252 -1 (2013 -08) for manufacturing and type test.
CATALOGUE NUMBERS/ORDERING CODE: Catalogue Numbers are generated as under:
| 1st – 4th positions | Series code – MW61 |
|---|---|
| 5th – 7th positions | Capacitance code: Capacitance x 10 |
| 8th position | Mounting code: B-Plain base |
| 9th position | Termination code: Thimble type (quick connect ) 5.0 mm |
Example: Motor – run Capacitor Series MW61, 2.5 µF, 400 VAC, in cylindrical aluminum can, with thimble type terminal 5.0 mm.
Catalogue No. MW61025BK
