APPLICATION: General purpose for single phase AC loads such as fans, motors etc. Specially designed for fans.
CONSTRUCTION: The capacitor elements are formed by winding low loss, self healing, metallised polypropylene film. High speed computerised winding machines are used for this purpose. The film tension is maintained at a constant value throughout the winding process thereby totally excluding air from the windings.
CONTAINER: Cylindrical containers made up of aluminum.
ENCAPSULATION: Dry type filling Resin (non-P.C.B.).
|STANDARD||IEC 60252-1 (2013-08), VDE 0560-8, JISC-4908, ISO 9001:2015.|
|CAPACITANCE RANGE||2.5µF, 3.5µF,4.5 µF(For other ratings, please inquire)|
|TERMINATION||MS tin plated thimble type terminal 5.0mm wide|
|RATED VOLTAGE||400V (For other ratings, please enquire)|
|RATED CASE TEMPRATURE||-25°C/70°C (25/70/21).|
|SAFETY CLASS||S0 (UnProtected)|
|DISSIPATION FACTOR||Less than 0.0010|
|TEST VOLTAGE BETWEEN TERMINALS||Type Test: 2x Rated Volts for 60sec|
Routine Test: 2x Rated Volts for 2 sec.
|TEST VOLTAGE BETWEEN TERMINALS AND CONTAINER||2.3 kV 50 Hz for 1 minute|
|CAPACITANCE TOLERANCE||±10% (other tolerances available on request)|